Well pump replacement cost depend on factors such as well size and pump type. A stainless-steel submersible well pump, for example, will be more expensive than a shallow well jet pump capable of pumping one gallon per minute. A well pump replacement typically costs between $200 and $500, not including installation.
Here’s a breakdown of how much each type of pump and installation costs:
Shallow well jet pumps—Because shallow well pumps are located directly within the well house, this pump replacement is typically the least expensive, costing around $200. Additional safeguards and features, such as wrapping exposed pipes and installing an insulated bag, will raise the cost.
Related Articles: American Transit Insurance Review| Steps to take In case of Accident
Deep-well jet pumps—At around $300, deep-well jet pumps are more expensive than shallow-well jet pumps. Jet pumps are generally less expensive than submersible models, but they are regarded as less reliable.
Deep well submersible well pumps—The price of a submersible well pump varies according to the horsepower chosen. Lower horsepower motors cost around $400, while higher horsepower motors can cost well over $500. Check valves that prevent backflow into the pump are considered standard for submersible models and will increase the cost of replacement.
Installation costs can range from hundreds to thousands of dollars depending on a variety of factors, including the depth of the well, the type of pump, your location, the equipment required, and even the terrain of your yard. The best way to get accurate pricing details is to contact a contractor for a quote.
Average Well Pump Replacement Cost
To begin, let’s look at some common averages for well pump replacement costs to get a sense of what you can expect to pay. The national average for replacing a well pump, including labor and all other costs, is just under $1,650, with the lower bound around $925 and the upper bound just above $2,400. The average cost of a deeper well project is closer to $2,000 or more.
However, there are a number of other factors that can, and frequently do, have a significant impact on these costs. These include the pump type, well size and depth, well location, and several others, which we’ll go over in detail in the following sections.
#1. Pump Design
The type of pump used in the well is one of the most important factors influencing the cost of a well pump replacement. There are several types of such pumps, including submersible, deep jet, shallow jet, and hand or solar pump options. These vary greatly in price, with submersible, deep, and shallow jets frequently retailing for as little as $100 to $200 – but potentially reaching $1,000 or even higher. Solar options, on the other hand, are typically the most expensive, with most parts costing more than $2,000 in most cases.
#2. Size of the Well
The size of the well, both in terms of width and depth, is also important here. Deeper wells will obviously necessitate the use of a deep pump, which is slightly more expensive than a shallow pump – but not by much. Furthermore, wider and deeper wells will necessitate more labor for pump replacement, raising the cost slightly.
Related Articles: Blackjack Insurance: All You Need to Know
To learn more about what factors influence the final cost of a water well pump replacement, or to inquire about any of our well pump or other well rehabilitation services, contact Mike Zimmerman Well Service LLC today.
#3. The Well Pump’s Location
In some cases, the physical location of the well pump itself will either increase or decrease the cost of a replacement for this component. The primary location-related factor here is whether the pump and well are buried.
In cases where the well and pump are buried, more effort will be expended to locate the components, which may necessitate the use of advanced tools and techniques. If the pump is underground, it will have to be dug up, which can be time-consuming. These costs may add up and significantly increase pump replacement charges; however, if the pump and well are not buried or are only lightly buried, the costs will decrease correspondingly.
#4. Other Components
The status of other components in your well, which is made up of more than just a pump, is also important here. For example, we’ll inspect your pipes and pressure tank to see if they’re in good condition; if they are, the cost of your pump replacement will be limited to this area alone. However, if either of these areas is worn down or damaged beyond repair, they must be replaced as well, increasing the overall cost of the project.
Well Water Pump Replacement Cost
The cost of replacing a well pump ranges between $900 and $2,500 on average. The cost varies depending on the size of the well, the materials used, and the amount of installation required. A shallow well pump, for example, will be less expensive to replace than a deep well submersible pump.
How long can a well pump run?
The duration of your well pump’s operation is determined by the volume of your pressure tank. A typical pressure tank will take between 30 seconds and two minutes to refill and return to normal pressure levels. When you use a lot of water, the time it takes for your tank to refill increases.
Is it possible for me to replace a well pump on my own?
It is not recommended that you replace a well pump on your own due to the amount of labor and specialized equipment required. Consult a professional if you plan on replacing or repairing your own tank.
Related Articles: National Union Fire Insurance Review: Products And Mode Of Operation
Submersible Well Pump Replacement Cost
A deep well submersible pump is located at the well’s bottom, directly in the water. The pump’s motor draws water from the well’s bottom and pushes it into your home’s water lines. These pumps are suitable for use in wells up to 300 feet deep. The pumps function similarly to sump pumps in that they draw water and pump it out.
What is the cost of replacing a submersible well pump?
The average cost of replacing a well pump is $538 to $1,851, with most homeowners spending $400 to $2,000 to install a deep-well submersible pump and $300 to $1,200 to install a shallow-well jet pump. New retail well pumps range in price from $100 to $1,200, with labor costs ranging from $200 to $800.
How long does a submersible well pump typically last?
A residential 3-wire well pump has an average life expectancy of 10 to 15 years and a residential 2-wire well pump has an average life expectancy of 8 to 13 years. The pump’s life expectancy is determined by a variety of factors, including the quality of the pump, how frequently the pump must run, and the electrical supply to the pump.
How Much Does a Well Pump Replacement Cost?
Well Pump Prices in a Nutshell:
- Total cost of installation: $850-$2,250
- Cost of a well pump: $100-$1,200
- Cost of labor: $200-$5,000
Your well pump is probably that unsightly piece of plastic or metal that sticks out like a sore thumb in your yard. Every time you mow the lawn, you just miss it. Perhaps you could cover it with a fake rock or hide it in some flowers so you don’t have to see it. As unappealing as it is to look at, your well pump is a vital piece of machinery. As a result, if something goes wrong, you’ll most likely need to replace it right away.
Related Articles: West Bend Insurance: Complete Product Review
The price of replacing or installing a well pump is determined by the depth of your well and the type of well pump you select. Here’s an introduction to well pumps and how much it will cost to install or replace one.
How Much Does a Well Pump Replacement or Installation Cost?
The well pump is possibly the most critical component of your water system. It collects water from the well and pumps it up into the rest of your home’s water system. If you’re digging a new well, you’ll need a pump to use it. According to Angie’s List, the average cost of replacing a well pump ranges between $850 and $2,250.
Deep Well Pump Replacement Cost
The national average for replacing a well pump, including labor and all other costs, is just under $1,650, with the lower bound around $925 and the upper bound just above $2,400. The average cost of a deeper well project is closer to $2,000 or more.
What is the cost of a deep well jet pump?
A new well pump replacement cost between $200 and $800 on average, depending on size and type. Submersible pumps cost between $200 and $1,200 before installation, while jet pumps cost between $100 and $800.
What is the operation of a deep well jet pump?
- Before turning on the machine, the pump system and pipes are usually filled with water.
- A vacuum is created during the process, and more water is drawn inside the impeller to fill the vacuum.
Related Articles: Ascendant Insurance Best Product Review 2022
- The nozzle and venturi then create a vacuum inside the injector.
How big do the holes for a jet pump have to be?
If the pump is a convertible jet pump, the tapped holes in the ejector must be 1 1/4 inch and one inch in diameter. Fit the tapped holes to the well later to place the pump. Install a 1 1/4 horizontal line check valve if the pump is for a driven well. Connect the 1 1/4 foot valve to the bottom suction pipe.
What is the recommended motor voltage for a jet pump?
Because it is dual voltage, the motor can be set to 115 or 230 volts and can deliver enough flow rate to meet the needs of those with wells ranging from 26 to 80 feet. It has an easy-to-use voltage selection switch and a pressure switch that is pre-set at 30/50 psi.
What type of pump do you require for a deep well?
A pressure tank is used by a deep-well submersible pump to draw water through a single pipe that connects the inside well to the house. Although a submersible pump can extract water from depths of up to 400 feet, it must be removed from the well casing for repairs. Two-wire pumps have built-in controls, whereas three-wire pumps require an additional control box.
Frequently Asked Questions: Well Pump Replacement Cost
How many years should a well pump last?
Well pumps typically last 8 to 15 years, depending on the type and model of equipment. However, several factors can contribute to a well pump’s premature failure.
How do I know if my well pump is bad?
The following are some of the most common symptoms of a faulty well pump and pressure tank:
- Water pressure fluctuations throughout the house.
- The tank is emitting strange noises or rapid clicking sounds.
- Faucets that spit.
- Shower water that is scalding.
- Electric bills are exorbitant.
Is replacing a water pump expensive?
Water pumps are not particularly expensive in general, but installation costs vary greatly depending on how the pump is powered. Typically, the cost of replacing a water pump ranges between $40 and $80.
Can a well pump last 20 years?
Your well pump can last an average of 8 to 15 years with proper well maintenance, though many homeowners report their pumps lasting much longer, often between 20 and 30 years!