Misting systems are ideal for outdoor cooling and climate control in residential and commercial spaces of all sizes. They are intended to use high pressure to produce tiny water droplets that are then distributed uniformly throughout the designated area. This enables flash evaporation, which instantly lowers the air temperature and provides users with a cooling effect without condensation. Because the water droplets evaporate rather than settle on surfaces, high-pressure misting systems will never leave anyone feeling damp, wet, or sticky. So, in this post, we’ll look at the best DIY high-pressure misting system kit and how to build it.

Best High-Pressure Misting System

You’ve got everything ready for an outdoor party. Everything is in its proper place, including the food. There’s only one problem: it’s excruciatingly hot. But that’s one factor you can’t change, right? No, not quite. If you want to enjoy any outdoor festivities without becoming overheated, consider installing a DIY high-pressure misting system kit.

These small machines connect to a standard water hose and convert the normal flow of water into a fine mist that can lower the temperature of your patio, deck, or other outdoor space by up to 30 degrees. This means that even the most suffocating of days become noticeably more bearable. The same can be said for simply relaxing and watching the sunset on a particularly hot day.

We’ve compiled a list of the best DIY high-pressure misting system kits and fans to keep you cool.

#1. Lasko 7050 Misto Outdoor Misting Fan

When planning an outdoor gathering, the weather is always an important consideration. While most of us hope for clear skies, we also know that means we’ll be baking in the sun as we go about our festivities. If that’s a concern, this small machine can reduce the ambient temperature in a given area by up to 25 degrees. It has three speeds so that you can keep things refreshed at an appropriate rate, and it even has a swiveling head with 90 degrees of motion so that you can direct the output as you see fit.

#2. The Patio Misting System Pro

When it comes to large gatherings or events that take up a lot of space, one misting fan, no matter how powerful, may not be enough. It’s just basic physics. Paying for multiple devices may work, but this requires controlling each one separately. What is the solution to all of these issues? Patio Misting System Professional. It truly has it all: nozzles, hookups, tubing, and a high-pressure pump, all of which can be controlled by a single unit. You can also change the speed and pressure with a remote control. It’s also simple to put together; there’s no need to hire a pro or Taskrabbit.

#3. iLIVING High-Pressure Residential Misting System

If you already have a fan and don’t see the point in purchasing another just for misting, iLIVING has you covered. The company provides an easy-to-install kit for attaching fans of various sizes. The kit includes a stainless-steel pump housing (which will not corrode), an inline water filter, flexible nylon tubing, and anti-drip nozzles.

#4. MistyMate Cool Patio Outdoor Misting Kit

Unlike our top pick, this model has a unique configuration that may be especially useful depending on the circumstances. It uses a hose-like structure rather than a centralized unit to evenly distribute mist over large areas. Its slim profile is made of UV-resistant material, so it can be used in direct sunlight without issue. Another benefit of its snake-like silhouette is that, unlike units with a rigid housing, it can be suspended from above, making it ideal for installing in a greenhouse or hanging from a pergola over a grand patio setup.

#5. Homenote Misting Cooling System

This model, like our previous pick, has a hose-like design that is adaptable in both structure and use. It’s 59 feet long and equipped with brass nozzles and adapters to spray a fine mist across your deck, garden, or lawn. It not only immediately lowers the temperature of the surrounding area, but it can also be used to create an impromptu water park for children and families. Its tubing is UV-resistant to prevent fading caused by the sun’s rays. Hang yours over your deck to enjoy a cool oasis while relaxing by the pool.

#6. AGPTEK Mist Cooling System with 65.6Ft Misting Line

AGPTEK Mist Cooling System comes with a 65.6ft PU pipe, 23 T-joint mist nozzles, cable ties, saddle clamps, and an adapter. The system is intended to provide a cooling environment in the open air, increase humidity, and reduce dust particles. Durability and long service life are ensured by the galvanized solid brass hose, UV-resistant black PU tubing, brass misting nozzles, and sealing tubing connectors. To prevent nozzle blockages, the system also includes a filter mesh and facet connectors. It is appropriate for outdoor areas such as gardens, patios, and poolside areas.

How to Build a High-Pressure Misting System

If you’ve decided to build a DIY high-pressure misting system, you’ve probably already started looking into the type of kit required to complete the installation. However, there are more technical aspects to consider than just the parts before you can design and install the system.

For example, the first thing to consider is the area you want the system to cover. The size and type of area you’re working with will help you determine what kind of cooling equipment you’ll need. Once you’ve determined your target area, you can begin working with misting professionals to create a customized system that will effectively cool your specific area.

Misting System Kit

Here’s what you’ll need to build a successful DIY high-pressure misting system:

#1. Water Pressurized Pump 

The type of pump used to fuel the water pressurization process is the most important part of the equation because it is the heart of the system. The size of the target area, the amount of control required over the area, and the number of nozzles installed on the misting lines usually determine the type of pump required for the system. This is the most important differentiating factor between misting systems.

#2. Distribution Line 

This is the line that transports pressurized water from the pump to your desired location. This distribution line transports water from the filtration system to the nozzles, ensuring that a highly clean and pressurized mist is applied to the area.

#3. Nozzles

The smallest component of the system, but one that should never be overlooked. The type of mist distributed into the area is determined by the misting system nozzle installed on the misting line. For example, a nozzle used to produce a voluminous mist with larger particles on average would be different from one used to produce a mist that evaporates faster without traveling as far. Each quality is critical in matching the nozzle to the space’s climatic and physical factors.

#4. Controls

Timing, temperature, volume, pressure, and feedback are always required. That’s where a good control system comes in. As professionals, we also understand the importance of having an easily integrated control system. That is why systems are built to integrate with existing automation systems. Giving you control over your system’s operation will maximize the effectiveness of your high-pressure misting kit.

#5. Water Treatment Filters 

Cleaning the water that runs through your high-pressure misting system is an important part of keeping the system running smoothly. These filters shield the nozzles and lines from potentially harmful debris that enters the system. Depending on the functions of the system within the target area, the purification process can also be customized to extend nozzle integrity and endurance.

Step to Build a DIY High-Pressure Misting System

However, if you intend to use your high-pressure misting system, here are the basic DIY steps:

Step 1: Connect the Water Supply

The flexible plastic tubing used for drip irrigation (12-inch diameter tubing is best) is the simplest way to supply water to misting nozzles. The first step is to connect this tubing to a water spigot, which necessitates the use of two items:

  • Attach a 200-mesh drip irrigation filter to the water spigot (this is necessary to keep the misting nozzles from becoming clogged with sediment)
  • Attach a 12-inch drip tubing adapter to the filter’s other end.

The unthreaded end of the drip tubing adapter will be open. Insert one end of the plastic tubing into this end, wiggling it back and forth a little to allow it to slide in about an inch. The tight fit forms a seal, preventing leaks, and is known as a compression fitting.

Step 2: Connect the Supply Tubing

Run the flexible plastic tubing from the spigot to the desired mist location. You can route the tubing using “elbow” compression fittings and “T” compression fittings as needed. Stake it to the ground every few feet with tubing stakes; cable ties to tree limbs or the metal frame of a canopy tent; and 12-inch nail straps to decks, pergolas, walls, and other structures.

Figure-eight end clamps are used to close off the open end (or ends) of the tubing.
It is worth noting that the shorter the tubing, the higher the water pressure at each misting nozzle, resulting in a finer mist.

Step 3: Select the Appropriate Misting Nozzles

There are numerous misting nozzles available on the market. Here are a few ideas:

  • It is crucial to use only those designed for low-pressure misting systems (medium- and high-pressure systems require an expensive pump).
  • Purchase nozzles designed for 12-inch tubing, which typically have a 1/8-inch threaded or barbed connector.
  • Plastic nozzles are less expensive, whereas brass nozzles last longer.
  • The finer the mist, the more it evaporates into the air rather than condensing and falling to the ground, and the smaller the diameter of the nozzle. This is an important consideration when you want mist but don’t want everything around you to get wet.
  • In other cases, such as in a greenhouse or near a pool, a little moisture is usually not an issue. If things become too wet for your liking, you can always turn off the system for a while – the summer heat will quickly dry things out.
  • The majority of low-pressure misting nozzles produce droplets that are around 100 microns in size. However, “superfine” low-pressure nozzles with droplets as small as 50 microns are available from specialty suppliers.
  • Another thing to think about is anti-drip devices. Misting nozzles tend to drip for a while after you turn off the water, which can be annoying in some situations. To avoid this, look for nozzles with an anti-drip device built in.

Step 4: Install Misting Nozzles

This is the simplest step in building a DIY high-pressure misting system. Simply punch holes in the tubing every two to three feet in the area where the mist is desired (using a drip tubing punch tool). Insert the nozzles until you hear a slight “snap” (or screw them in if using threaded nozzles). Turn on the water at full force, relax, and cool off.

How to Buy the Best Home High-Pressure Misting System Kit

When it comes to purchasing a DIY high-pressure misting system kit for your patio, there are numerous factors to consider. While it isn’t as costly as an air conditioner, you still want to make sure your money is well spent. Needless to say, making an informed decision requires considering all relevant factors. To fully reap the benefits of your wise investment, consider all available options and weigh their advantages and disadvantages before investing your money in a product. Simply put, the best high-pressure misting system must-have features that meet your specific requirements.

#1. Size

There are numerous size options available these days; after all, not everyone’s patio is the same size. Because size is highly subjective, you must exercise caution when determining the length of the product. Before purchasing a misting system, measure the dimensions of your patio.

#2. Spraying force

Few people realize that applying the wrong pressure can result in money being wasted. You don’t want to be sitting outside with a low-pressure mist that’s barely doing its job. Check the details provided by the brand to ensure you get the proper fit.

#3. Number of nozzles

The best patio misting system should have an appropriate number of nozzles to cover your outdoor space. Some of the most dependable models include a dozen nozzles, but they are also more expensive. Regardless, there’s no point in purchasing a misting system if it can’t even cool your patio. As a result, this is the most important factor of all, and you should never overlook it.

How much does a high-pressure misting system cost?

Low-pressure misting systems typically cost $30 to $100, mid-pressure systems $200 to $1,000, and high-pressure systems $1,500 to $3,500. Professional installation typically costs between $190 and $675.

Do high-pressure misting systems work?

Yes. High-pressure misting systems are the most effective at reducing the overall temperature of your patio by up to 35 degrees.

What is a high-pressure misting system?

High-pressure misting systems aid in the relief of excessive heat, which is common in outdoor venues. They emit an evaporative ultra-fine mist that reduces temperatures in the immediate vicinity by up to 30 degrees.

What pressure should a misting system be?

A minimum pressure of 35 pounds per square inch is required (PSI). This is the typical supply pressure for city water.

Do misting systems use a lot of water?

The simple answer is one gallon of water per hour per nozzle when using a standard misting nozzle.

What is the difference between misting and spraying?

Mist is defined as a layer of cloud formed as a result of volcanic activity and changes in temperature and humidity. Spray has defined as a flow of water in droplets that is worse than fog or mist.


Choosing the best DIY high-pressure misting system kit for your outdoor space can be difficult, but with the right information and careful consideration, you can find a system that meets your needs and your budget. You can choose the best DIY high-pressure misting system kit for your outdoor space by taking into account your climate, coverage area, water supply, and budget, and enjoy cool, comfortable outdoor living all summer long.


Leave a Reply

Your email address will not be published. Required fields are marked *

You May Also Like