How Much Does a Walk In Shower Cost?

A walk-in shower is a desired house feature that is frequently the focal point of bathroom remodeling projects. However, having a larger bathing area isn’t just a luxury. A walk-in shower’s wider entrance and low curb improve accessibility, especially for people with restricted mobility. The average walk-in shower cost is $6,641, with the lower end starting at $3,121. The actual cost of installing a walk-in shower as part of your bathroom renovation is determined by a number of factors. Install reading to discover more about the cost to install a walk-in shower.

How Much Does a Walk In Shower Cost to Install?

A walk-in shower installation can cost between $750-$6,850. This price varies depending on the size and parts that you require. If you want a custom shower with an expensive door and faucet and need to add piping, your simple shower might significantly increase the cost.

There’s also the cost of labor, which can range from $400 to $1,000 depending on who you choose. Shower installers typically utilize their own materials. If you wish to use a specific brand, you will almost certainly have to buy the parts yourself.

How Much Does It Cost Per Square Foot to Install a Walk-In Shower?

The conventional walk-in shower measures 32 by 32 inches. Expect to cost roughly $1,150 for installation and materials if you utilize a prefabricated shower without a door. The cost of installing a walk-in shower per square foot would be roughly $210.

You can also incorporate a shower into an existing bathtub. This necessitates the removal of the present tub in order to install an alternative that can sustain both. So, if you’ve always wanted a bigger tub, you may now have the best of all worlds.

Cost to Install a Walk-in Shower by Type

Some individuals like a shower only, while others prefer a tub-shower combination, and still others may choose a full-on steam shower that also functions as a home sauna. Here’s what you can expect to pay whichever way you decide to become clean.

#1. Walk-in shower

While the usual walk-in shower is 32 by 32 inches, you may make it any size you like. You can even have a shower that is half the size of your bathroom! Perhaps you have a little amount of room and require the smallest shower possible while remaining pleasant and functional.

You should also consider the cost of tiling a shower (assuming you don’t install a prefab unit) and any special amenities, such as a rainfall showerhead. With these factors in mind, the ultimate cost of a walk-in shower should be roughly $4,200 or higher.

#2. Tub-shower combination

A tub-shower combination is ideal for individuals who wish to relax after a long day at work. A tub-shower combo, like a walk-in shower, can be customized with additional features such as jets for the tub or a door rather than a curtain for privacy. Expect to pay between $1,500 to $8,500.

#3. Steam shower

A steam shower provides the luxurious experience of a spa without the need to leave the house. These showers provide warm steam to assist you in working up a sweat. A steam shower normally costs around $4,350, and you’ll most likely be limited to a walk-in cost.

#4. Accessibility showers

Accessibility showers provide assistance in entering the shower as well as stability when cleaning up. Showers with accessibility features typically cost roughly $600 more than a standard shower. This includes installing a grab bar and a bench.

Factors That Impact the Cost to Install a Walk-in Shower

#1. Size

The International Residential Code (IRC) requires a shower to be at least 30 by 30 inches in size. The usual dimension for walk-in showers is 32 by 32 inches; however, it must be at least 36 inches square to meet the Americans with Disabilities Act accessibility regulations (ADA).

If you want to buy a larger shower kit or have one custom-made by a bathroom contractor, you’ll have to spend more for both the product and the installation. However, regardless of size, purchasing a walk-in shower that can easily fit into your pre-existing area will allow you to save money because there will be less work to do in order to prepare and finish the space. It will cost extra in time and materials if you have to remodel or restructure your space to accommodate a new shower.

#2. Style or type

Although we mentioned square showers before, you can obtain walk-in showers in almost any form or size, including ones that fit right in the corner of a bathroom. Keep in mind that the more you modify it, the more it will cost—a feeling shared by nearly every home renovation job.

#3. Bathroom hardware and materials

Tile, marble, fiberglass, or acrylic are the most popular materials used in walk-in showers. Expect to pay between $2 and $17 per square foot if you pick tile. Marble costs between $40 and $65 per square foot for the materials alone; labor costs an extra $700 to $2,450. A fiberglass insert can cost between $400 and $2,000, whereas an acrylic insert costs between $500 and $2,000.

The kind of materials for your walk-in shower, like any other finish for your home, will define your budget. A 32 × 32 acrylic stall, for example, could cost between $750 and $3,000 However, for the same shower size, a high-end custom tile shower would cost between $4,200 and $8,500. Some of the more affordable prefabricated models are constructed of plastic, a much lighter material that costs between $300 and $500.

The showerhead and faucet, in particular, might be more or less expensive depending on the type and material used in their construction. To give you an idea of the huge range of low-end and high-end alternatives, a new showerhead and faucet can cost anywhere from $50 to $1,000 (including installation).

#4. Labor

A walk-in shower installation will cost you an additional $400 to $1,000. This is in addition to the cost of materials.

The true labor cost to install your new walk-in shower, on the other hand, is determined by how much work is required to prepare the area, including demolition and removal of the old shower or tub. Shower removal might cost between $50 and $100, and up to $250 if you need to employ a professional to dispose of it.

If you need to install new plumbing or relocate pipes, the cost will be higher, as would installing new plumbing for a shower, toilet, sink, or anything else in your home that requires running water.

#5.Permits

Depending on your state, you may be required to obtain a builder’s permit for a new shower. This is easier to do if you already have a bathroom, but it may still cost you up to $250 to secure approval for the work. Permits are not to be neglected; failing to obtain one for your bathroom can result in a large fee, sometimes per day.

How Much Does it Cost to Install a Walk-in Shower Yourself?

Only if you’re installing a shower or tub liner or a prefab shower kit should you install a shower yourself. The cost of installing a liner yourself is normally around $500, which includes the liner, caulking, glue, and sealant.

Any other project should be handled by a shower installer and a plumber. Because not all shower installers are qualified plumbers, you should contact a plumber in your neighborhood to get them ready for your future installation.

DIY vs. Hiring a Professional

While you may feel driven to save a few hundred dollars by doing it yourself, messing with your home’s plumbing is never a good idea unless you really know what you’re doing. In fact, you might not even get a permit. Overall, restoring damage caused by faulty installation might be more expensive than simply hiring a professional, especially if there is considerable water damage.

Labor

Professional labor often adds $400 to $2,000 to the cost of a walk-in shower install. Contact at least three different shower installers in your area to ensure you get the best estimates. The ultimate labor cost will be determined by the extent of the project, as more adaptations and restricted space will lengthen the process.

How Much Does a Walk-In Shower install Cost in Your Area?

While the cost of living will have an impact on labor expenses, the final cost of installation will be determined by the size and style of the shower. That’s why someone living in a New York apartment may pay less than someone living in a Minnesota house—if you’re on a tight space budget, you can only go for what’s available.

Shower installation costs in the United States are as follows:

California: $3,650
Texas: $4,250
Florida: $2,900
Colorado: $4,400
Michigan: $4,600
New York: $3,600
Minnesota: $5,000
Massachusetts: $4,450

What is a fair price for a walk-in shower?

A walk-in shower can cost between $700 and $6,850. This price varies depending on the size and parts that you require. If you want a custom shower with an expensive door and faucet and need to add piping, your simple shower might significantly increase the cost.

How much should a walk-in shower cost in 2022?

A walk-in shower installation costs between $1,000 and $12,000 on average, with a national average of $7,500. A basic, prefabricated unit can cost as little as $1,000, and a personalized unit might cost anywhere between $6,500 and $12,000.

How much does it cost to install a tiled walk-in shower?

The installation of a walk-in shower starts at $4,200. Because walk-in showers are often larger and contain more components, they can be slightly more expensive; anticipate to pay between $4,200 and $8,500 to tile a walk-in shower (a standard 32-inch-square model).

Does a walk-in shower add value?

In general, a walk-in shower enclosure will increase the value of a home, especially when combined with a modern shower system in a modern home. However, this is only true when they are used as an extra bathroom element rather than as a replacement for a standalone bathtub.

How much does it cost to remove a tub and install a walk-in shower?

During a bathroom remodel, the cost to convert your bathtub to a shower ranges from $1,200 to $8,000, with an average cost of $3,000. The overall cost is determined by the size, accessibility features, fittings, installation, and other factors.

Is it worth it to convert a tub to a shower?

A tub-to-shower conversion is one of the most effective ways to improve your bathroom and your home in general. With this type of update, your bathroom will be much more modern, aesthetically beautiful, and easier to use for all types of people that may live in the home with you.

Are walk-in showers a good idea?

Walk-in showers are more accessible to homeowners than bathtubs with showers. They eliminate the need for elderly homeowners and people with disabilities to go over ledges or enter steep thresholds to shower, reducing the risk of tripping and making them ideal for senior homeowners and people with disabilities.

Is it cheaper to build a shower or buy one?

Custom-tile showers are often far more expensive than prefabricated shower systems, while luxury-level prefabricated showers are comparable in cost. However, a handcrafted tile emanates elegance in a manner that few prefabricated shower systems can.

Frequently Asked Questions

How much does it cost to replace a tub with a walk-in shower?

What are the cons of a walk-in shower?

The Drawbacks of a Walk-In Shower

Taking hot showers in walk-in showers raises the humidity and moisture levels in your bathroom, which eventually leads to mold formation. Water can splash over the other portions of the bathroom as the walk-in shower is utilized, resulting in a filthy or slippery bathroom.

Does replacing a bath with a shower devalue your home?

It may have an impact on the value of your home.

The value of your home may be affected if you replace the bath in your main or only bathroom with a shower, though this isn’t always the case and depends on how well-designed your shower room is.